Skip to main content

Aquaculture system · Complete farm set

Closed fish farming system

Real control over your water, less risk in your pond

A closed aquaculture system that brings the canvas pond, the water filtration and the water circulation together as one set, specified around the space you have and the stocking level you are aiming for.

Items in the set
12 items
Water filtration
4 stages
Pond diameter
1.5 – 12 metres
Overview of a BH FARM closed aquaculture system, showing canvas ponds, filter tanks and the water circulation piping

Canvas pond · Filtration · Designed on site

Filter tanks and circulation piping installed beside a canvas pond on the BH FARM farm

Understanding the system

What is a closed fish farming system?

The BH FARM closed system brings the fish pond, the water filtration and the water circulation together as one set, so that water quality is managed across the whole farm and the risks of fish farming are reduced.

A canvas pond working together with its filtration set in a BH FARM closed aquaculture system
Pond, filtration and circulation, engineered to work as one set
  1. Water leaves the pondThe main pump draws water from the pond into the filtration set.
  2. Four stages of filtrationWater passes through all four filter tanks in sequence.
  3. Water returns to the pondFiltered water is sent back to the pond through the clean water line.
  4. Clean the filter, keep the pondA separate drain line is there for washing the filtration set.
  5. Oxygen for the pondThe oxygen pump is sized to the number of fish being raised.
  6. Equipment sized to the pondPond, main pump and oxygen pump are all specified for the job.

System components

What a BH FARM system set contains

One set contains 12 items, grouped here into 9 parts by what each one does. Every item is listed as published on the BH FARM website.

  1. A circular BH FARM canvas pond with its support frame
    01

    Canvas pond with a sturdy frame

    Diameters from 1.5 to 12 metres, chosen to suit the space and the stocking level.

    Where it worksStart and end of the circulation loop

  2. 02

    Main water pump

    Specified to suit the pond size; it draws water from the pond into the filtration set.

    Where it worksFeeds water into the filtration set

  3. Main circulation piping running along the line of canvas ponds on the BH FARM farm
    03

    Main circulation piping

    Carries the water from the pond to the filtration set and back to the pond again.

    Where it worksThe main water route through the system

  4. A bank of four filter tanks installed beside a canvas pond on the BH FARM farm
    04

    4-stage water filtration

    Four filter tanks working in sequence as stages 1 through 4.

    Where it worksWhere water quality is managed

  5. The clean water line returning filtered water into a stocked canvas pond
    05

    Clean water return line

    Carries filtered water from the filtration set back into the fish pond.

    Where it worksWhere filtered water re-enters the pond

  6. A standpipe and valve draining the filter tanks, at position 9 in the BH FARM illustration
    06

    Filter drain line

    Makes the filtration set easy to wash, without draining the whole pond.

    Where it worksA separate route for washing the filters

  7. Pipework joining the filter tanks beside the pond, at position 10 in the BH FARM illustration
    07

    Internal piping between filter tanks

    Connects the flow from one filter tank to the next.

    Where it worksLinks filter tanks 1 through 4

  8. 08

    Filter support frame

    The structure that holds the filtration set at a working height.

    Where it worksThe base the filter tanks stand on

  9. A 6 m canvas pond with aeration and its filtration set
    09

    Oxygen pump

    Sized to suit the number of fish being raised in the pond.

    Where it worksWorks at the fish pond

Where each item sits on a real installation

Photographs from the BH FARM website showing the position of items 1 to 12 in the set. The numbers and arrows are part of the original images.

A canvas pond with water returning to it, numbered 1 to 3 on the original photograph
The pond, the main circulation piping and the point where water returns
A bank of filter tanks beside the pond, numbered 4 to 7 on the original photograph
The four tanks of the 4-stage filtration system
Clean water line, filter drain line and internal piping, numbered on the original photograph
Clean water line, filter drain line and the piping between tanks
A canvas pond under aeration, with the oxygen pump position numbered on the original photograph
The oxygen pump working at the fish pond

How it works

How the water circulation works

Select a step to follow the water through the diagram. The real layout is adapted to the pond size and to each farm's site.

Water circulation in the BH FARM closed fish farming systemWater from the canvas pond is drawn by the main pump into four filter tanks, flows on through the piping between them, and returns to the pond through the clean water line, with a drain line for washing the filters and an oxygen pump working at the pond.Intake lineClean water return lineCanvas fish pondOxygen pumpMain water pump4-stage filtration1Mechanicalfiltration2Biologicalfiltration3Water pumpand air pump4Clean waterto the pondFilter drain line
Canvas pond and the circulation mainThe four filter tanks beside the pondInner piping between the filter tanksClean water returning to the pondDrain pipe and valve for flushing the filters
Step 01Canvas pond and the circulation main

Select a step to highlight it in the diagram

Oxygen pumpWorks at the fish pond, positioned as shown in the installation photographs, and sized to the number of fish.

Filtration in a closed farm

How the filtration set works

The filtration diagram published on the BH FARM website shows the four steps below. The equipment list counts four filter tanks (tanks 1 to 4) separately; the website does not say which step sits in which tank.

  1. 1

    Mechanical filtration

    The first step in the website's own filtration diagram.

  2. 2

    Biological filtration

    The biological filtration step that follows it.

  3. 3

    Water pump and air pump

    The part that moves the water and adds air to the system.

  4. 4

    Clean water back to the pond

    Filtered water is returned to the fish pond.

From a real farm

Black filter tanks beside canvas ponds under a roofed shelter
Filter tanks beside the canvas ponds
A pond and filter installation with blue circulation pipes at a farm
Circulation pipes linking the pond and the filter set

The media used in each tank, how much of it, and which step belongs to which tank are not published on the website. Ask the team for the detail that applies to each pond size.

Open system vs closed system

What a closed system changes

The comparison below follows the points published on the BH FARM website.

Open system

Problems farmers meet in an open system

  • Water quality is hard to control
  • Exposed to contamination from outside
  • High cost, uncertain output

BH FARM closed system

What the BH FARM closed system sets out to do

  • Helps control water quality across the whole system
  • Helps reduce the risks of fish farming
  • Helps manage cost and plan each cycle
  • Supports expansion while keeping the same standard

This describes how the system is designed to work. It is not a guarantee of yield or of fish survival rates.

Why this system

What the BH FARM system is built to deliver

01 · Water Quality Management

Water quality management

Helps control water quality across the whole system, from the pond through the filters to the water coming back.

02 · Risk Reduction

Risk reduction

Helps reduce the risk from the factors that affect fish farming, such as contamination from outside.

03 · Cost Management

Cost management

Helps manage cost and plan each cycle more clearly, because every pond runs the same way.

04 · Farm Expansion

Farm expansion

Supports expanding the farm with the standard of the existing system kept in mind.

Who it is for

Who the closed farm system suits

The groups listed on the BH FARM website. If you are not sure whether the system fits the way you farm, talk to the team directly.

A small circular canvas pond suited to someone starting out

People starting a farm

Start from a set that is already matched, instead of sourcing equipment from several places.

Several installed canvas ponds ready to run on a farm

Small to medium farms

Run the same system across several ponds and manage the whole farm one way.

Water being tested at the pond side in a closed system

Farmers who need water control

Use the filtration and circulation to look after water quality across the system.

Rows of circular canvas ponds installed without permanent construction

Anyone avoiding permanent construction

A canvas pond with its own frame installs and runs without building anything permanent.

Fish in a BH FARM closed system pond

Raising fish for the table

Raise fish for consumption in a system where the water is under control.

A commercial fish farm running a complete closed farm system

Commercial fish farms

Add capacity while keeping the standard of the system already in place.

Designed around your farm

Sizing the pond and the equipment to your farm

Choosing a system comes down to the space you have, the pond size and the way you farm. BH FARM selects and designs the system on site.

Choosing a pond size

Follows the pond size guidance published on the BH FARM website.

Small

1.5 – 3 m
  • Limited space or a back yard
  • Starting out, trying it
  • Holding fish

Easy to control, easy to run

Medium

4 – 6 m
  • Smallholder farms
  • Commercial raising
  • Quality control needed

A balance of cost and output

Large

Over 6 m
  • More production capacity
  • Farming as a business
  • Long term expansion

Built for a farm that is growing

What gets matched to each farm

Canvas pond size
1.5 to 12 metres in diameter, chosen for the space and the stocking level.
Main water pump
Specified to suit the pond size selected.
Oxygen pump
Sized to the number of fish being raised.
Layout on site
The system is selected and designed around the real site.

What to ask the team about

The following is not published on the BH FARM website, so it is not shown here. Contact the team for current information.

  • Prices for the set and for individual items
  • Pump capacity and flow rate
  • Filter media type and quantity per tank
  • Filter tank sizes used with each pond size
  • Installation time and on-site service
Talk through a system design

FAQ

Questions about the farm system

Every answer follows the information published on the BH FARM website. For anything not published there, the team is happy to advise.

Ask the team
What is a closed fish farming system?
It brings the fish pond, the water filtration and the water circulation together as one set. Water leaves the pond for the filtration set and is returned to the pond, which helps manage water quality and reduce the risks of fish farming.
What equipment does the system include?
The set contains 12 items: the canvas pond with its frame, the main water pump, the main circulation piping, 4-stage filtration (tanks 1 to 4), the clean water return line, the filter drain line, the internal piping between filter tanks, the filter support frame and the oxygen pump.
How many filtration stages are there?
The equipment list calls it a “4-stage filtration system”, counted as four filter tanks (tanks 1 to 4), and a separate filtration diagram on the website shows four steps: mechanical filtration, biological filtration, the water pump and air pump, and clean water returning to the pond. The website does not say which step sits in which tank, nor what media each tank holds; please ask the team.
How does the water get back into the pond?
The main pump draws water from the pond into the filtration set. It flows through all four tanks by way of the internal piping between them, and is then returned to the pond through the clean water line.
What pond sizes does the system support?
Canvas ponds from 1.5 to 12 metres in diameter, chosen to suit the space available and the stocking level.
Can the pump be matched to my pond?
Yes. The main pump is specified to suit the pond size, and the oxygen pump is sized to the number of fish. For pump capacity and flow rates, please ask the team directly.
Can the system be designed around my site?
Yes. The system is selected and designed on site, taking account of the space available, the pond size and the way you farm.
Is this suitable for someone starting a farm?
The website lists people starting a farm and small to medium farms among the groups the system suits, along with farmers who need water quality control and anyone who would rather not build a permanent pond.
How do I arrange an installation?
Contact the team on LINE @bhfarm, call 094-429-6915 or email support@bhfarmasia.com. Tell them the site you have, the pond size you are considering and how many fish you plan to raise, so they can advise precisely.

Contact & orders

Start your fish farm as a system

Talk to the BH FARM team about choosing the pond and the equipment to suit your site and the way you want to farm.

Farm location
Suan Nok Farm Ma, 123/1 Moo 15, Lao Khwan, Lao Khwan District, Kanchanaburi 71210, Thailand
Follow us
TikTok
LINE QR code for adding BH FARM Asia as a contact

Scan to add us on LINE

@bhfarm (with the @)